How to Setup OBDLink MX+ Bluetooth to IOS iPhone

Here obd2reader.com share the guide on how to setup OBDLink MX+ Bluetooth to IOS iPhone.

 

Download & install OBDLink app

Scan the QR code or visit the URL from your
Apple iOS device to download the OBDLink app:

How to Setup OBDLink MX+ Bluetooth to IOS iPhone (1)

 

Plug OBDLink MX+ into the OBD port

The OBD port is usually found on the driver’s side,
under the dash.

How to Setup OBDLink MX+ Bluetooth to IOS iPhone (1)

 

Turn ignition to Key On, Engine Off

How to Setup OBDLink MX+ Bluetooth to IOS iPhone (3)

Vehicles with push button start: press the button without
stepping on the brake pedal.

‘POWER’ LED will turn ON, and the ‘BT’ LED will
start flashing slowly.

– Are the LEDs off on your MX+?
Your vehicle may have a blown fuse that supplies power to the DLC.

 

Open ‘Settings’ app, and enable ‘Bluetooth’

How to Setup OBDLink MX+ Bluetooth to IOS iPhone (4)

 

Press the ‘Connect’ button on OBDLink MX+

How to Setup OBDLink MX+ Bluetooth to IOS iPhone (5)

The ‘BT’ LED will switch to a fast blink.

Attention! You must complete step 6 within 2 minutes. If you need more time, press the ‘Connect’ button again

 

Tap ‘OBDLink MX+’ to pair the device when it appears in ‘Other Devices’

How to Setup OBDLink MX+ Bluetooth to IOS iPhone (6)

 

‘OBDLink MX+’ will now appear as ‘Connected’ under ‘My Devices’

How to Setup OBDLink MX+ Bluetooth to IOS iPhone (7)

 

Launch OBDLink app and set the communication type to ‘Bluetooth’

Settings > Preferences > Communications

Tap ‘Bluetooth’

How to Setup OBDLink MX+ Bluetooth to IOS iPhone (8)

 

Tap ‘Connect’ from the OBDLink app main menu

How to Setup OBDLink MX+ Bluetooth to IOS iPhone (9)

Once the app establishes a connection with
‘OBDLink MX+’ the ‘BT’ LED will turn on solid.

How to Setup OBDLink MX+ Bluetooth to IOS iPhone (10)

Tap ‘Diagnostics’ to start scan