BlueDriver scanner is a powerful diagnostic tool for DIY user,not only can run on Android devices,but also can work on IOS device.Here i share the guide on how to setup BlueDriver scanner on IOS.
Once you download the BlueDriver App from the App Store follow this simple procedure to use BlueDriver as a powerful diagnostic Scan Tool.
The following steps require you to plug your BlueDriver Sensor to your vehicle OBD-II port.
First locate your OBD port (also called the DLC or Data Port).Most of the time the OBD port is under the steering column,it can also be located in the center console,and sometime it is on the passenger side.
Open you iPhone to tap “Settings”
Wait for BlueDriver to show up in the list of Available Devices
Tap “BlueDeiver” and wait for it to show “Connected”
Start your vehicle,and open “BlueDriver” app,the App will complete connection
Now BlueDriver is now ready to use
1.Pairing and connecting only has to be done once
2.If Pairing is ever lost(blinking red LED) repeat these steps
3.You can leave the BlueDriver plug in as long as you like
4.You can use the BlueDriver on as many vehicle as you like.