Detail Tutorial of logging BlueDriver Data

This article share the tutorial of how to logging BlueDriver date for vehicle to vehicle comparison step by step.

Let’s check it below.

With your BlueDriver OBD II adapter connected, start the vehicle and open the BlueDriver app.

Once connected, select live

Detail Tutorial of Logging BlueDriver Data (1)

Then select settings (the little gear icon)

Detail Tutorial of Logging BlueDriver Data (2)

Select all PIDs

A message will display that it’s not recommended to select more than 5 PIDS at a time. Disregard it and select them all.

Detail Tutorial of Logging BlueDriver Data (3)

Important! Make sure units are:

Temperatures = F

Speed = MPH

Pressures = kPa

Air Flow =g/s

Select blue arrow to check units for each PID

Detail Tutorial of Logging BlueDriver Data (4)

Check units

Detail Tutorial of Logging BlueDriver Data (5) Detail Tutorial of Logging BlueDriver Data (6)

Now restart the BlueDriver app and select  ‘live’ again.

To compare your vehicles cruise data with Pidfusion, you will need to maintain 60 MPH on this next screen for a few mins.

Warning!!! Have someone else watch this screen while you keep your eyes on the road.

After recording a few minutes of cruise and idle, select share.

Detail Tutorial of Logging BlueDriver Data (7)

Our preference is Google Drive but to each their own

Detail Tutorial of Logging BlueDriver Data (8)

You might want to rename your data log to something that you will remeber

Detail Tutorial of Logging BlueDriver Data (9)

Now you can login at Pidfusion.net and compare your data.